Keri-systems NXT-6RK Manuel d'utilisateur télécharger pdf

NXT-6RK Proximity Reader and Keypad

Installation Guide

Page 1 of 7 P/N: 01217-001 Rev. A

The Keri NXT-6RK is a keypad reader typically used for card + PIN dual verification applications. It

transmits keypad data in either 8-bit burst (default) or 26-bit Wiegand formats and can be used as a

keypad-only device. Since the NXT-6RK communicates via Wiegand format it requires an NXT-RIM

for operation.

1.0 Specifications

1.1 NXT-Reader Dimensions

• 4.6 inches tall by 3.0 inches wide by 0.7 inches deep

• 11.7 cm by 7.7 cm by 1.8 cm

1.2 Power/Current Requirements

• 10 to 14 VDC @ 115 mA (maximum current draw at 12 VDC)

1.3 Operating Conditions

• -40°F to 150°F (-40°C to 65°C) – 0% to 90% Relative Humidity, non-condensing

1.4 Read Range

• w/NXT-C - up to 6 inches (15.2 cm)

• w/NXT-I/S - up to 4 inches (10.2 cm)

• w/NXT-K - up to 3 inches (7.6 cm)

Read range is stated in a clean RF and electrical environment using credentials presented parallel to

the reader surface with the reader operating at 12 VDC. Read range may be affected by local

installation conditions. Read range will be reduced when mounted on metal.

• This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15

of the FCC Rules. 

These limits are designed to provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and,

if not installed and used in accordance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful interference in which

case the user will be required to correct the interference at his own expense.

• Changes to this equipment not expressly approved by Keri Systems, Inc. may void FCC certification and the user’s

authority to operate 

this equipment.

• Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device

must accept any interference, including interference that may cause undesired operation of the device.

1 2 3 4 5 6 7

Résumé du contenu

Page 1 - 1.0 Specifications

NXT-6RK Proximity Reader and KeypadInstallation GuidePage 1 of 7 P/N: 01217-001 Rev. AThe Keri NXT-6RK is a keypad reader typically used for card + PI

Page 2 - 1.6 Cable Options

NXT-6RK Proximity Reader and KeypadInstallation GuidePage 2 of 7 P/N: 01217-001 Rev. A1.5 Keypad Formats• 8-bit burst (default)• 26-bit WiegandThe Key

Page 3 - 2.0 Installation Drawing

NXT-6RK Proximity Reader and KeypadInstallation GuidePage 3 of 7 P/N: 01217-001 Rev. A2.0 Installation DrawingCover snaps onto Base.Insert screwdriver

Page 4 - Installation Guide

NXT-6RK Proximity Reader and KeypadInstallation GuidePage 4 of 7 P/N: 01217-001 Rev. A3.0 Wiring and Configuration DrawingP/N: 01217-002 Rev. AD10 -

Page 5 - 4.0 RIM Configuration

NXT-6RK Proximity Reader and KeypadInstallation GuidePage 5 of 7 P/N: 01217-001 Rev. A4.0 RIM ConfigurationThe default RIM configuration is for an MS-

Page 6

NXT-6RK Proximity Reader and KeypadInstallation GuidePage 6 of 7 P/N: 01217-001 Rev. A4.3 Verifying RIM ConfigurationThe corresponding reader type and

Page 7 - 5.0 Contact Keri Systems

NXT-6RK Proximity Reader and KeypadInstallation GuidePage 7 of 7 P/N: 01217-001 Rev. A5.0 Contact Keri SystemsEnd of document.Keri USA Keri UK, Irelan

Commentaires sur ces manuels

Pas de commentaire

Keri-systems NXT-6RK Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Matériel Keri-systems NXT-6RK. Keri Systems NXT-6RK User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Keri-systems NXT-6RK